With the rise and rise of sex toy purchases, the pocket pussy market in particular has exploded. Penis owners are finding much excitement in finding the masturbator that works for them. As the number of products on offer increases, so does my creativity - I love to craft my own toys, and help others do the same. It occurred to me that, while there are plenty of simple ways to make a homemade fleshlight, it is also possible to create one with a little technology. So, now I want to show you that you can unleash your creativity and bring your own unique creations to life with a 3D printer! With just a few simple steps, you can now make your own customised masturbators at home. Let the fun begin and get ready to start creating! 

Assemble Your 3D Printer Parts.

Once you have all the necessary parts, it's time to assemble them. Refer to your 3D printer user manual for specific instructions on how to set up and configure your 3D printer. Make sure you read carefully and follow all safety precautions while assembling your 3D printer. Also keep in mind that some minor assembly of parts may be required before proceeding with printing. When you're done with assembly, double check that everything is connected securely and functioning properly to avoid any potential surprises during the printing process.

Design Your Custom Sex Toy in 3D Modeling Software.

After you have set up your 3D printer and connected it to a computer, the next step is to design your custom sex toy. Or perhaps more specifically the mould for your very personally crafted sex toy.

Using a 3D modelling software such as Autodesk Meshmixer or Tinkercad, you can create 3D models of any object or creature you can imagine. If the thought of designing your own sex toy seems daunting, don't worry – there are plenty of tutorials available online that will teach you how to use the software and help get started in creating amazing 3D objects! 

And if you're struggling to wrap your head around the idea of designing and printing a masturbator then have no fear. If this is your first rodeo perhaps a ready made design would be helpful. The details of the White Snow Onahole Masturbator by Sanfuxd, inside and out, captured my imagination. But don't take my word for it, do go and find your own. Even if just for inspiring your own design.

Prepare your design for the printer. 

Once you have designed your custom sex toy in 3D modelling software, or downloaded a design from online, the next step is to prepare it for printing. You will need to select a "slice" size of your object – this determines how much detail you want to include in the final 3D print. You can also adjust other settings such as infill, support structures, and material type. These settings will influence how your mould looks and functions once printed. 

The material you use for printing is really important too. Some materials will prevent the silicone you pour into the mould from curing, some aren't food (and therefore body) safe, and others are no good for the cure, nor food safe. Natural PLA is often seen as the safest option, being both food safe and not interfering with the curling process. While you may not be ingesting the rubber, you will be getting up close and personal with the end product so it's best to take care.

After these adjustments are made, you're ready to hit "print"!

Print Your Mould with a 3D Printer.

Now that you've adjusted the settings for your mould, it's time to send it to your 3D printer. Make sure everything is in place and press "print" on your 3D printer. The printer will then begin to print your mould layer by layer until it is complete. Keep an eye on things throughout the process; if the printing isn't going as planned, you may want to stop the process, adjust some settings and try again. 

Finish, Pour and Enjoy!

After the 3D printer has finished its job, you will have a custom sex toy mould of your own creation! It's time to complete the masturbator, but now things are going to get a little bit messy. (Depending on how you like to pour!) Once the different parts of the mould have been printed and the edges have been smoothed you can then prep the interior walls with release agent (I'm told vaseline works well for this) and assemble the masturbator mould. 

Once this stage is complete it's time to pour the silicone to make a usable penis pleasure toy. You didn't think I was going to make you masturbate into a hard plastic mould did you? The designer of the Snow Queen mould recommends using a soft and stretchy silicone such as ecoflex 00-10. 

You can find pouring silicone easily online, take your time to select the right one as there are different elasticities and you want it to be soft and squidgy enough for maximum pleasure! You may also want to keep an eye out for different colours, or even tint your own. 

Once you've assembled the mould, then mixed and poured the silicone you will need to leave it to set. This will vary, depending on the silicone you're using. Always refer to the instructions on the packet. 

Once your new toy has set, release it from the mould, sit back and… enjoy! 

Whether you're crafty or not, you can still treat your penis.

Once you get the hang of printing your mould and pouring your stroker you might decide to get even more adventurous by adding different textures and even vibrations. The world is your Oyster when it comes to creating your own pleasure products.

Or, you may well be thinking it's not for you. "Thanks barefoot, that's great. But I have neither a 3D printer, nor the inclination to make my own custom sex toy", is a perfectly valid response to the ideas above. No worries at all, I've got you covered. If the homemade approach isn't for you then there is always something ready made to tickle your fancy with. Here at Honey Play Box there is a wide selection of strokers offering a variety of sensations to the discerning penis.